Foc Communication CO.,LTD
FOC COMMUNICATION CO.,LTD Leading Manufacturer of Fiber PLC Splitter and Fiber Optic Patch Cord
Add to Cart
10G Fiber Optic Patch Cord MPO/MTP - FC OM3 MM 50/125um Breakout Cable 12 Core
We supply and Manufacture fiber optic trunk cables with multi fiber connections and custom cable assemblies. Using MTP or MPO fiber connectors. With its higher port density, MTP fiber is easier to install - just pull 1 cable with 12 fibers for one easy plug-in. Delivers big savings in installation time and cost.
MTP cables are your best choice for high density fiber networks. It's specifically designed for fast ethernet, fiber channel, data center and gigabit ethernet applications. This 12 Fiber harness cable is used for a direct connection between QSFP+ to (4) SFP+ ports with no patch panels or intermediate trunks in between. This LSZH cable is designed and tested to conform to IEC-60332-1 and IEC-61034.
For customers wanting more testing, interferometry test reports can be supplied upon request prior. MTP/MPO endface geometry, ferrule radius of curvature, fiber height and core dip are among some of the test data.
Fiber Optic Patch Cord Specifications
Standards: compliant with Telcordia and IEC
Types: single mode, multimode
Terminations: FC, SC, ST, MU, LC, D4, DIN, E2000, MT-RJ, MPO, SMA, E2000, FDDI, and ESCON
Insertion Loss (dB): less than 0.3 (PC and UPC)
Exchangeability: less than 0.2 dB
Tensile Strength: less than 0.2 dB (0 to15 kgf)
Temp. Range: (- 40 to +80 degree centigrade)
Fiber Optic Patch Cable Specification
| Connector A | MTP Female (pinless) | Connector B | FC UPC |
| Fiber Mode | OM3 50/125μm | Wavelength | 850/1300nm |
| MTP Connector IL | 0.35dB Max(0.15dB Typ.) | FC Connector IL | ≤0.3dB |
| MTP Connector RL | ≥20dB | FC Connector RL | ≥30dB |
| Jacket OD | 3.0mm | Fan-Out Diameter | 2.0mm |
| Installation Tensile Load | 100 N | Long-Term Tensile Load | 50 N |
| Storage Temperature | -40°C to +85°C | Operating Temperature | -10°C to +70°C |
| Cable Jacket | LSZH | Fiber Count | 12 Fibers |
Features of fiber optic patch cord
Easier upgradability to 40G and 100G with MPO pre-term solutions
Faster installation with pre-terminated solutions
Better quality through exhaustive design validation against TIA standards
3-flange reel and default pulling eye for easier installation
Better architectural flexibility with high-performance 0.2 dB OM4 MPO connectors
Better contamination control with Data Center ready packaging
Ordering information
Interface | Connector | Length | OD | Color of jacket | Jacket | Fiber Type | Cores |
P-PC | FC-FC | 1M | 0.9mm | B-Black | P-PVC | SM | Simplex |
U-UPC | SC-SC | 3M | 1.6mm | Y-Yellow | L-LSZH | MM 50/125um | Duplex |
A-APC | LC-LC | 5M | 1.8mm | W-White | OFNR | MM 62.5/125um | 4cores |
| ST-ST | 10M | 2.0mm | Customized | OFNP | MM OM3 | 6cores |
| MU-MU | Customized | 3.0mm |
| Customized | MM OM4 | 8cores |
| MTRJ-MTRJ |
| Customized |
|
|
| 12cores |
| E2000-E2000 |
|
|
|
|
| 24cores |
| OM3 |
|
|
|
|
| Customized |
| Customized |
|
|
|
|
|
|
Fiber Optic Patch Cord, Optical Fiber Patch Cord, Fiber Optic Assemblies, Fiber Jumpers